Pressure sensors

Pressure switch transducers

High pressure transducers Information about pressure regulators with a switch and other devices. Additional information for customers.

Basic information about a high pressure switch

A special selection of components for automation is very important. This is especially important when getting acquainted with high pressure switches. With competent assistance, you can be sure of:

the success of modernization and automation;

obtaining excellent complete answers to all questions

the correct selection of basic or original components.

Inside pipelines or hermetically sealed vessels, pressure sensors monitor the pressure parameters of liquid, steam or gas. Technically, everything is very simple: the environment affects the measuring cell, and this effect is converted into an electronic signal. Such sensors are perfect for setting pressure in both relative and absolute values. They are used both in complexes with condensation and in equipment where the parameters of the internal environment change rapidly.

High pressure switch equipment and other nuances

Pressure regulators with a switch may include various elements. Among them, for example, an insulating diaphragm of the CSB standard. Such a device in conjunction with a meter allows you to monitor the level and differential pressure of the medium. The protective role of diaphragms is that they cut off the sensor from the harmful effects of:

corrosive;

particularly viscous;

highly heated media.

Such a pressure sensor with a switch is able to measure the density and interphase level in the tank. Other features:

use of metal separating membranes;

optional gold or PTFE coating;

possibility of execution according to customer specifications.

Flanges of at least DN 40 can be used for connection. Cells must be from DN 50. The permissible load reaches 420 bar. Operating temperatures will be as follows: minimum - 40 and maximum 400 degrees.

The price for the pressure transducer in our company will be perhaps the best in the whole country. The conditions are always thought out and correspond to common practice. The range includes devices for measuring the pressure of the melt, which have rigid rods. They have a durable body and can withstand significant temperatures.

It is quite stable in operation and accurately measures the performance of equipment with a significant service life. The pressure transducer sensor of the MRT category will be useful for rubber and plastic casting lines. Depending on customer requests, the use of either a mercury or oil meter can be provided.

Sensors usually do not support direct access to the terminals for connection. This point is associated with a number of considerations, including the need to maintain tightness. In almost any case, the connection is made using a connector. Most often, the disconnection is performed immediately after connecting the cable. Equipment should be selected taking into account the characteristics of the measured medium and its parameters. Professionals also recommend selecting devices taking into account the maximum pressure.